| 1. Remove back wheels. |
|
2. Weaken a tension of a rope of the hand brake and remove support fingers. |
|
|
| 3. Remove a support from a fixing arm and remove brake slips. |
|
4. Measure thickness of brake slips and replace them if it is necessary. |
|
5. Installation is carried out upside-down removals. Lower the piston deep into the cylinder if it is necessary. |
|
6. Establish a support on a place and establish new fixing bolts of fingers of a support. |
|
7. Tighten fixing bolts till the demanded moment of an inhaling. On termination of installation adjust the hand brake. |
