Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
- 10. Brake system
   + 10.1.2. Shock-absorbers
   + 10.2. Technical characteristics
   10.3. Pumping of hydraulic system
   10.4. Hydraulic tubes and hoses
   10.5. Brake overlays of forward brakes
   10.6. Brake overlays of back wheels
   10.7. Brake shoes of back brakes
   10.8. Brake disk of a forward wheel
   10.9. Brake disk of a back wheel
   10.10. Brake drum of a back brake
   10.11. Support of a forward brake
   10.12. Support of a back brake
   10.13. Wheel cylinder of a back brake
   10.14. Main brake cylinder
   10.15. Brake pedal
   10.16. Vaakuumny amplifier
   10.17. Vacuum valve of a servoamplifier
   10.18. Rope of the hand brake
   10.19. Lever of the hand brake
   10.20. The valve of adjustment of pressure in a contour of back brakes (to 96 g of century)
   10.21. Switch of fires of a stoplight
   10.22. General description of system of anti-blocking of brakes (ABS)
   10.23. ABS system elements
   10.24. Vacuum pump (diesel and petrol engines in volume of 2,3 l)
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c

10.23. ABS system elements

GENERAL INFORMATION

HYDRAULIC MODULE
Prevention

On models from ABS disconnect the accumulator before the work beginning to prevent air hit in the ABS module.


Removal

PERFORMANCE ORDER
1. Disconnect the socket of connection and a "weight" wire.
2. Mark hydraulic tubes and disconnect them from the ABS hydraulic module.
3. Turn off fixing bolts and remove the ABS module.

Installation

Installation is carried out upside-down removals.

ELECTRONIC CONTROL UNIT

Removal

PERFORMANCE ORDER
1. Remove back sitting.
2. Release a fixing clip and disconnect the socket of connection of the electronic control unit.
3. Turn off fixing nuts / bolts (shooters) and remove the ABS electronic control unit.

Installation

Installation is carried out upside-down removals.

SENSORS OF SPEED OF ROTATION OF FORWARD WHEELS

Removal

PERFORMANCE ORDER
1. Remove the corresponding wheel.
2. Remove a sensor wire from fastenings and disconnect the socket of connection of the sensor.
3. Remove the sensor and the fixing plug.

Installation

Installation is carried out upside-down removals.

SENSORS OF SPEED OF ROTATION OF BACK WHEELS

Removal

PERFORMANCE ORDER
1. Remove the corresponding wheel.
2. Get a sensor wire from fastenings that it could be removed together with the sensor.
3. Remove the sensor and the plug.

Installation

Installation is carried out upside-down removals.