Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
- 10. Brake system
   + 10.1.2. Shock-absorbers
   - 10.2. Technical characteristics
      10.2.2. Back shock-absorbers
      10.2.3. Back springs
      + 10.2.4. Semi-axes
   10.3. Pumping of hydraulic system
   10.4. Hydraulic tubes and hoses
   10.5. Brake overlays of forward brakes
   10.6. Brake overlays of back wheels
   10.7. Brake shoes of back brakes
   10.8. Brake disk of a forward wheel
   10.9. Brake disk of a back wheel
   10.10. Brake drum of a back brake
   10.11. Support of a forward brake
   10.12. Support of a back brake
   10.13. Wheel cylinder of a back brake
   10.14. Main brake cylinder
   10.15. Brake pedal
   10.16. Vaakuumny amplifier
   10.17. Vacuum valve of a servoamplifier
   10.18. Rope of the hand brake
   10.19. Lever of the hand brake
   10.20. The valve of adjustment of pressure in a contour of back brakes (to 96 g of century)
   10.21. Switch of fires of a stoplight
   10.22. General description of system of anti-blocking of brakes (ABS)
   10.23. ABS system elements
   10.24. Vacuum pump (diesel and petrol engines in volume of 2,3 l)
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c

10.2. Technical characteristics

GENERAL INFORMATION

Forward brakes

Type
Disk, with an one-piston mobile support
Diameter of a brake disk
288 mm
Thickness of a disk:
  – continuous disks:
     • the new
15 mm
     • wear limit
13 mm
  – ventilated disks:
     • the new
25 mm
     • wear limit
23 mm
The most admissible palpation of a disk
0,05 mm
Thickness of a frictional material of brake slips:
  – the new
14 mm
  – wear limit
2 mm

Back drum-type brakes

Internal diameter of a brake drum:
  – the new
230 mm
  – wear limit
231 mm
Thickness of a frictional material of brake shoes:
  – the new
5,25 mm
  – wear limit
2,50 mm
The most admissible palpation of a brake drum
0,07 mm
Back disk brakes:
  – diameter of a brake disk
245 mm
  – thickness of a brake disk:
     • the new
10 mm
     • wear limit
8 mm
The most admissible palpation of a brake disk
0,05 mm
Minimum admissible thickness of brake slips
7 mm

Moments of an inhaling carving, N of m.

Fixing nuts of the ABS hydraulic module
8
Supports of brakes of forward wheels:
  – support fingers
25
  – bolts of a fixing arm
125
  – bolt of a fixing arm brake hoses / wires
25
  – nuts of connections of brake tubes
15
  – fixing nuts of the main brake cylinder
25
  – nuts of a fixing arm of a pedal of a brake / vacuum amplifier *
25
  – nut of fastening of a spring of the valve of adjustment of pressure
20
Supports of brakes of back wheels:
  – support fingers *
35
  – fixing bolt
65
  – fixing bolts of the wheel cylinder
10
  – bolts of fastening of wheels
110

* Use new nuts and bolts