Repair and operation of the car of Audi 100/A6 - 10.10. Brake drum of a back brake//Audi of 100/A6 1990-1997 / songbuddy.ru

Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
- 10. Brake system
   + 10.1.2. Shock-absorbers
   + 10.2. Technical characteristics
   10.3. Pumping of hydraulic system
   10.4. Hydraulic tubes and hoses
   10.5. Brake overlays of forward brakes
   10.6. Brake overlays of back wheels
   10.7. Brake shoes of back brakes
   10.8. Brake disk of a forward wheel
   10.9. Brake disk of a back wheel
   10.10. Brake drum of a back brake
   10.11. Support of a forward brake
   10.12. Support of a back brake
   10.13. Wheel cylinder of a back brake
   10.14. Main brake cylinder
   10.15. Brake pedal
   10.16. Vaakuumny amplifier
   10.17. Vacuum valve of a servoamplifier
   10.18. Rope of the hand brake
   10.19. Lever of the hand brake
   10.20. The valve of adjustment of pressure in a contour of back brakes (to 96 g of century)
   10.21. Switch of fires of a stoplight
   10.22. General description of system of anti-blocking of brakes (ABS)
   10.23. ABS system elements
   10.24. Vacuum pump (diesel and petrol engines in volume of 2,3 l)
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c



10.10. Brake drum of a back brake

Removal

PERFORMANCE ORDER
1. Remove a back wheel.
2. Remove a cap from the center of a brake drum.
3. Remove to the check and a lock cap.
4. Turn off a nut of fastening of a nave, remove a washer and the external bearing.
5. Remove a brake drum. If brake shoes interfere with removal of a brake drum, execute the following operations.
6. Weaken a tension of a rope of the hand brake.
7. By means of a screw-driver lift klinyshka (shooter) that blocks departed from a drum.

Survey

PERFORMANCE ORDER
Clear a brake drum and examine it on existence of damages or wear. Measure internal diameter of a drum in several points. Repair or replace a brake drum if it is necessary.

Installation

Installation is carried out upside-down removals.