Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
- 12. Body
   12.2. Maintenance and repair
   12.3. Front bumper
   12.4. Rear bumper
   12.5. Cowl
   + 12.6. Rope of opening of a cowl
   12.7. Cowl lock
   12.8. Doors
   12.9. Internal panel of furnish of a door
   12.10. Frame of a window of a door
   12.11. Handle of a door and lock elements
   12.12. Glass and window regulator
   12.13. Trunk lid
   12.14. Elements of the lock of a trunk lid
   12.15. Back door
   12.16. Elements of the lock of a back door
   12.17. Elements of the central lock
   + 12.18. Elements of electric window regulators
   12.19. Rear-view mirrors and related elements
   12.20. Front and back glass
   12.21. Top hatch
   12.22. External elements of furnish of a body
   12.23. Sitting
   12.24. Mechanism of a tension of forward seat belts
   12.25. Elements of seat belts
   12.26. Panels of furnish of salon
   12.27. Central console
   12.28. Dashboard
+ 13. Electric equipment
+ 14. Good advice


ff85f19c

12.9. Internal panel of furnish of a door

Removal

PERFORMANCE ORDER
1. Release a fixing clip and remove the furnish panel.
2. Turn off fixing bolts (shooters) and remove the handle.
3. Remove the window regulator handle if it is necessary.

FORWARD DOORS

PERFORMANCE ORDER
1. Remove the switch of a window regulator and the handle of adjustment of a rear-view mirror or the adjustment panel. On models with electric adjustment of rear-view mirrors remove the furnish panel in front of the handle.
2. Remove the handle from a door and disconnect the connection socket.
3. Release a fixing clip and remove the handle.
4. Turn off fixing screws along the edges of the panel of furnish and in an opening of the handle of a door.
5. Lift the furnish panel up to release fastenings and remove the panel, disconnect the socket of connection of loudspeaker.

BACK DOORS

PERFORMANCE ORDER
1. Remove the handle from a door and remove the window regulator switch.
2. Remove a fixing clip (shooter) and remove the handle.
3. Turn off fixing screws and remove the furnish panel.

Installation

PERFORMANCE ORDER
1. Installation is carried out upside-down removals.
2. At installation check, that rubber fastenings (shooter) were correctly established.
3. Check correctness of laying of wires.