Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
- 12. Body
   12.2. Maintenance and repair
   12.3. Front bumper
   12.4. Rear bumper
   12.5. Cowl
   + 12.6. Rope of opening of a cowl
   12.7. Cowl lock
   12.8. Doors
   12.9. Internal panel of furnish of a door
   12.10. Frame of a window of a door
   12.11. Handle of a door and lock elements
   12.12. Glass and window regulator
   12.13. Trunk lid
   12.14. Elements of the lock of a trunk lid
   12.15. Back door
   12.16. Elements of the lock of a back door
   12.17. Elements of the central lock
   + 12.18. Elements of electric window regulators
   12.19. Rear-view mirrors and related elements
   12.20. Front and back glass
   12.21. Top hatch
   12.22. External elements of furnish of a body
   12.23. Sitting
   12.24. Mechanism of a tension of forward seat belts
   12.25. Elements of seat belts
   12.26. Panels of furnish of salon
   12.27. Central console
   12.28. Dashboard
+ 13. Electric equipment
+ 14. Good advice


ff85f19c
Установка сигнализации на гранту

12.11. Handle of a door and lock elements

Removal

INTERNAL HANDLE OF OPENING OF THE DOOR

Look subsection 12.9.

EXTERNAL HANDLE OF THE FORWARD DOOR

PERFORMANCE ORDER
1. Remove a frame of glass and a protective casing if it is necessary.
2. Lift the handle, remove a fixing clip and a casing.
3. Release the plug of the lock (shooter) and disconnect draft of the handle from the lock.
4. Turn a fixing clip and remove it from the lock and a door.

5. Turn off the fixing screw and remove the external handle from a door.

DRUM OF THE LOCK OF THE FORWARD DOOR

PERFORMANCE ORDER
1. Remove the external handle.
2. Shift the plug down and disconnect draft from the lock.
3. Disconnect the connection socket from the switch.
4. Remove the panel of furnish of the handle and remove a lock casing.
5. Remove the switch if it is necessary.

LOCK OF THE FORWARD DOOR

PERFORMANCE ORDER
1. Remove a door frame.
2. Disconnect drafts from the lock.
3. Disconnect the socket of connection of a drive of the lock.
4. On models with the central lock disconnect a vacuum hose from a lock drive.

5. Turn off fixing screws.

6. Remove the lock and consolidation.
7. Turn a rope on 90 ° and disconnect it from the lock.

EXTERNAL HANDLE OF THE BACK DOOR

PERFORMANCE ORDER
1. Remove a door frame.
2. Release a fixing clip and disconnect draft of the lock from the handle.

3. Turn off fixing screws and remove the handle.

LOCK OF THE BACK DOOR

PERFORMANCE ORDER
1. Remove a door frame.
2. Disconnect draft of the lock from the handle.
3. Remove lock ropes from fastenings on a door.
4. Turn off fixing screws and disconnect a vacuum hose.
5. Cнимите lock.
6. Disconnect ropes after lock removal.

Installation

PERFORMANCE ORDER
Installation is carried out upside-down removals. Adjust length of draft so that there was a free wheeling approximately at 1 mm, then establish a fixing clip.