Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
- 12. Body
   12.2. Maintenance and repair
   12.3. Front bumper
   12.4. Rear bumper
   12.5. Cowl
   + 12.6. Rope of opening of a cowl
   12.7. Cowl lock
   12.8. Doors
   12.9. Internal panel of furnish of a door
   12.10. Frame of a window of a door
   12.11. Handle of a door and lock elements
   12.12. Glass and window regulator
   12.13. Trunk lid
   12.14. Elements of the lock of a trunk lid
   12.15. Back door
   12.16. Elements of the lock of a back door
   12.17. Elements of the central lock
   + 12.18. Elements of electric window regulators
   12.19. Rear-view mirrors and related elements
   12.20. Front and back glass
   12.21. Top hatch
   12.22. External elements of furnish of a body
   12.23. Sitting
   12.24. Mechanism of a tension of forward seat belts
   12.25. Elements of seat belts
   12.26. Panels of furnish of salon
   12.27. Central console
   12.28. Dashboard
+ 13. Electric equipment
+ 14. Good advice

12.23. Sitting

Removal

SITTING LOBBIES WITH MECHANICAL ADJUSTMENT

PERFORMANCE ORDER

Turn off fixing bolts of sitting, shifting it forward and back if it is necessary, and remove sitting.

SITTING LOBBIES WITH THE ELECTRIC DRIVE

PERFORMANCE ORDER

Turn off fixing bolts of sitting, shifting it forward and back if it is necessary. Disconnect the socket of connection of the electric drive and remove sitting.

PILLOW OF BACK SITTING

PERFORMANCE ORDER

Turn off fixing screws and remove a sitting pillow.

BACK OF BACK SITTING (MODEL WITH THE SEDAN TYPE BODY)

PERFORMANCE ORDER

1. Remove a pillow.

2. Disconnect fixing clips. Disconnect connection sockets (if it is necessary) and remove a sitting back.

BACK OF BACK SITTING (MODEL WITH THE VERSATILE PERSON TYPE BODY)

PERFORMANCE ORDER

1. Remove a sitting pillow.
	2. Turn off a bolt of the bottom fastening of a seat belt.
	3. Combine a sitting back. Turn off fixing screws (shooters).
	4. Unbend a carpet.
	5. Remove a casing.

6. Turn off fixing screws and remove a sitting back.

Installation

Installation is carried out upside-down removals.