Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
- 12. Body
   12.2. Maintenance and repair
   12.3. Front bumper
   12.4. Rear bumper
   12.5. Cowl
   + 12.6. Rope of opening of a cowl
   12.7. Cowl lock
   12.8. Doors
   12.9. Internal panel of furnish of a door
   12.10. Frame of a window of a door
   12.11. Handle of a door and lock elements
   12.12. Glass and window regulator
   12.13. Trunk lid
   12.14. Elements of the lock of a trunk lid
   12.15. Back door
   12.16. Elements of the lock of a back door
   12.17. Elements of the central lock
   + 12.18. Elements of electric window regulators
   12.19. Rear-view mirrors and related elements
   12.20. Front and back glass
   12.21. Top hatch
   12.22. External elements of furnish of a body
   12.23. Sitting
   12.24. Mechanism of a tension of forward seat belts
   12.25. Elements of seat belts
   12.26. Panels of furnish of salon
   12.27. Central console
   12.28. Dashboard
+ 13. Electric equipment
+ 14. Good advice


ff85f19c

12.28. Dashboard

GENERAL INFORMATION

Models with моделум a safety airbag
1. Body

2. Dashboard

3. Fixing nut

4. Fixing arm

5. Latch

Removal

PERFORMANCE ORDER
1. Remove the central console.
2. Remove a steering wheel.
3. Remove the instrument guard, the combined switch and the shelf.
4. Turn off fixing screws (are specified by shooters) and remove the central panel.
5. Remove the panel of furnish of the lock of ignition.
6. Turn off fixing screws of the central fastening.
7. Remove lateral panels of furnish.
8. Turn off two fixing bolts (are specified by shooters and remove the block of safety locks.
9. Disconnect the socket of connection of a bulb of illumination of a glove compartment and disconnect the socket of connection of the relay.
10. On models with the module of an airbag of safety will twist an additional fixing nut.
11. Turn off the remained fixing bolts and remove the dashboard.

Installation

Installation is carried out upside-down removals.