Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
- 12. Body
   12.2. Maintenance and repair
   12.3. Front bumper
   12.4. Rear bumper
   12.5. Cowl
   + 12.6. Rope of opening of a cowl
   12.7. Cowl lock
   12.8. Doors
   12.9. Internal panel of furnish of a door
   12.10. Frame of a window of a door
   12.11. Handle of a door and lock elements
   12.12. Glass and window regulator
   12.13. Trunk lid
   12.14. Elements of the lock of a trunk lid
   12.15. Back door
   12.16. Elements of the lock of a back door
   12.17. Elements of the central lock
   + 12.18. Elements of electric window regulators
   12.19. Rear-view mirrors and related elements
   12.20. Front and back glass
   12.21. Top hatch
   12.22. External elements of furnish of a body
   12.23. Sitting
   12.24. Mechanism of a tension of forward seat belts
   12.25. Elements of seat belts
   12.26. Panels of furnish of salon
   12.27. Central console
   12.28. Dashboard
+ 13. Electric equipment
+ 14. Good advice

12.17. Elements of the central lock

Removal

PUMP OF SYSTEM OF THE CENTRAL LOCK

PERFORMANCE ORDER

1. Remove a pillow of back sitting.
	2. Remove an insulator and get the pump.
	3. Disconnect the socket of connection and a vacuum hose and remove the pump.

DRIVE OF THE LOCK OF THE DOOR

Look subsection 12.16.

DRIVE OF THE LOCK OF THE TRUNK LID (MODEL WITH THE SEDAN TYPE BODY)

PERFORMANCE ORDER

1. Remove the internal panel of furnish.

2. Disconnect draft from a drive.

3. Turn off fixing screws and remove a drive, having disconnected a vacuum hose.

DRIVE OF THE LOCK OF THE TRUNK LID (MODEL WITH THE VERSATILE PERSON TYPE BODY)

PERFORMANCE ORDER

1. Remove the furnish panel.

2. Disconnect draft from a drive.

3. Turn off fixing screws and remove a drive, having disconnected a vacuum hose.

DRIVE OF THE LOCK OF THE COVER OF THE JELLIED MOUTH

PERFORMANCE ORDER

1. Remove or unbend the furnish panel for receiving access to a drive.

2. Disconnect a vacuum hose, release a fixing clip and remove a drive.

Installation

Installation is carried out upside-down removals.