Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
- 12. Body
   12.2. Maintenance and repair
   12.3. Front bumper
   12.4. Rear bumper
   12.5. Cowl
   + 12.6. Rope of opening of a cowl
   12.7. Cowl lock
   12.8. Doors
   12.9. Internal panel of furnish of a door
   12.10. Frame of a window of a door
   12.11. Handle of a door and lock elements
   12.12. Glass and window regulator
   12.13. Trunk lid
   12.14. Elements of the lock of a trunk lid
   12.15. Back door
   12.16. Elements of the lock of a back door
   12.17. Elements of the central lock
   + 12.18. Elements of electric window regulators
   12.19. Rear-view mirrors and related elements
   12.20. Front and back glass
   12.21. Top hatch
   12.22. External elements of furnish of a body
   12.23. Sitting
   12.24. Mechanism of a tension of forward seat belts
   12.25. Elements of seat belts
   12.26. Panels of furnish of salon
   12.27. Central console
   12.28. Dashboard
+ 13. Electric equipment
+ 14. Good advice


ff85f19c
Как промыть радиатор печки без снятия

12.25. Elements of seat belts

SEAT BELTS OF FORWARD SEATS (AUDI 100 MODEL)

Removal
PERFORMANCE ORDER
1. Remove decorative strips and turn off fixing screws (are specified by shooters) panels of furnish bodies are resistant.
2. Remove the panel of furnish of a rack of a body.
3. Turn off fixing screws and remove the bottom panel of furnish.
4. Disconnect the Prokon-ten system rope from a natyazhitel.
5. Turn off the bottom fixing bolt of a seat belt.
6. Turn off fixing screws (are specified by shooters in drawing at the left) and remove the top panel of furnish (the fixing clip is specified by an arrow on a rivunka on the right).
7. Turn off a nut of the top fastening.
8. Turn off a fixing bolt of a tension drum and remove a seat belt.

Installation

Installation is carried out upside-down removals.

SEAT BELTS OF FORWARD SEATS (AUDI A6 MODEL)

Removal

PERFORMANCE ORDER
1. Disconnect the connection socket from a natyazhitel.
2. Turn off the bottom fixing bolt of a seat belt.
3. Turn off fixing screws (are specified by shooters in drawing at the left) and remove the top panel of furnish (the fixing clip is specified by an arrow on a rivunka on the right).
4. Turn off a nut of the top fastening.
5. Turn off fixing screws (are specified by shooters in drawing at the left) and remove the top panel of furnish (the fixing clip is specified by an arrow on a rivunka on the right).
6. Turn off a nut of the top fastening.
7. Disconnect the socket of connection of the sensor of the alarm system.

Installation

Installation is carried out upside-down removals.

PERFORMANCE ORDER
1. Establish a uvula of a tension drum in cut on a body rack (it is specified by an arrow).
2. Tighten a fixing bolt till the demanded moment of an inhaling.

LATERAL SEAT BELT (MODELS WITH THE SEDAN TYPE BODY)

Removal
PERFORMANCE ORDER
1. Remove back loudspeakers.
2. Remove back sitting.
3. Remove the back shelf.
4. Turn off a fixing bolt of a tension drum and remove a belt.

Installation

Installation is carried out upside-down removals.

LATERAL SEAT BELT (MODELS WITH THE VERSATILE PERSON TYPE BODY)

Removal
PERFORMANCE ORDER
1. Turn off the bottom fixing bolt.
2. Turn off fixing screws and remove a belt latch.
3. Remove a head restraint and directing plugs.
4. Unbend a sitting material.
5. Divide halves of a buckle of a belt and extend a belt outside.
6. Turn off a fixing bolt of a tension drum and remove a seat belt.

Installation

Installation is carried out upside-down removals.

CENTRAL SEAT BELT OF BACK SITTING AND BUCKLE

Removal

PERFORMANCE ORDER
1. Remove a sitting pillow.
2. Turn off a fixing bolt and remove a belt / buckle.

Installation

Installation is carried out upside-down removals.