Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   + 6.1.2. Technical characteristics
   + 6.2. Multipoint system of injection of fuel
   + 6.3. System of injection of MPI/MPFI (6-cylinder engines)
   - 6.4. Power supply system of diesel engines
      6.4.2. Technical characteristics
      6.4.3. Air filter
      6.4.4. Rope of an accelerator and elements of a pedal of an accelerator
      6.4.5. Fuel level sensor
      6.4.6. Fuel tank
      + 6.4.7. The injecting pump
      6.4.8. Speed of idling and maximum speed of operation of the AAS engine
      6.4.9. Mode of fast idling (AAS engine)
      6.4.10. Residual volume of fuel (AAS engine)
      6.4.11. Fuel injectors
      6.4.12. Control system of operation of the diesel engine
      6.4.13. Inlet collector
   6.5. Device of service of heating
   6.6. Diagnostics of malfunctions of system of heating
   6.7. Conditioner: not only "pluses", but also "minuses"
   6.8. Rules of service of the conditioner
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c



6.4.5. Fuel level sensor

Removal

PERFORMANCE ORDER
1. Remove handles (models with the Versatile person type body).
2. Turn off fixing screws and uncover.
3. Disconnect the socket of connection of the sensor.
4. Disconnect a hose of the return pipeline.
5. Disconnect a hose of supply of fuel.
6. Turn off a plastic fixing ring and remove it.
7. Remove the sensor.

Installation

PERFORMANCE ORDER
Installation is carried out upside-down removals. Combine adjusting marks in the sensor before installation of a fixing ring.