Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   + 6.1.2. Technical characteristics
   + 6.2. Multipoint system of injection of fuel
   + 6.3. System of injection of MPI/MPFI (6-cylinder engines)
   - 6.4. Power supply system of diesel engines
      6.4.2. Technical characteristics
      6.4.3. Air filter
      6.4.4. Rope of an accelerator and elements of a pedal of an accelerator
      6.4.5. Fuel level sensor
      6.4.6. Fuel tank
      + 6.4.7. The injecting pump
      6.4.8. Speed of idling and maximum speed of operation of the AAS engine
      6.4.9. Mode of fast idling (AAS engine)
      6.4.10. Residual volume of fuel (AAS engine)
      6.4.11. Fuel injectors
      6.4.12. Control system of operation of the diesel engine
      6.4.13. Inlet collector
   6.5. Device of service of heating
   6.6. Diagnostics of malfunctions of system of heating
   6.7. Conditioner: not only "pluses", but also "minuses"
   6.8. Rules of service of the conditioner
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c

6.4.6. Fuel tank

Removal

PERFORMANCE ORDER
1. Disconnect the socket of connection of the fuel level sensor and fuel hoses.
2. Turn off the fixing screw of a jellied mouth.
3. Remove a hose of a jellied mouth.
4. Establish a jack under a fuel tank.
5. Turn off a nut of a back fixing strip of a fuel tank.
6. Turn off a nut of a forward fixing strip of a fuel tank.
7. Remove a fuel tank.

Installation

Installation is made in sequence, return to removal.