| Engine code:
|
| 1896 cm3, direct injection, turbo-supercharging, 66 kW |
1Z, AHU
|
| Diameter of the cylinder:
|
| 1Z, AHU |
79,5 mm
|
| Piston stroke:
|
| 1Z, AHU |
95,9 mm
|
| Extent of compression:
|
| 1Z, AHU |
19,5:1
|
| Pressure of a compression:
|
| 1Z, AHU |
19,0 bar
|
| The maximum difference of pressure between cylinders |
5,0 bar
|
| Operating procedure of cylinders |
1–3–4–2
|
| N1 cylinder arrangement |
From a gas-distributing belt
|
| Greasing system
|
| Oil pump |
Drive from an intermediate shaft
|
| Pressure of oil (80 °): |
| Idling |
1,0-2,5 bar
|
| 3000 rpm |
3,0-5,0 bar
|
| Free wheeling |
0,20 mm
|
| Axial gap |
0,15 mm
|
| Additional driving belts
|
| Adjustment of a tension of a wedge-shaped belt of the generator and air conditioner |
The automatic
|
| Progibaniye of a power steering belt
|
| The new |
2,0 mm
|
| The used |
5,0 mm
|
| The bolts, fixing an arm of the generator and the compressor of the air conditioner to the block of cylinders |
25
|
| The bolts, fixing the compressor to an arm |
20
|
| Generator bolt |
25
|
| The bolts, fixing the lever of an additional belt to a natyazhitel |
10
|
| The bolts, fixing a natyazhitel of an additional belt |
25
|
| Bolts and nuts of a cover of a rod: |
| – cтупень 1 |
30
|
| – cтупень 2 |
Tighten for 90 °
|
| Bolts of a cover of the bearing of a camshaft |
20
|
| Bolts of a cover of a camshaft |
10
|
| Bolts of a cover of the first bearing of a camshaft |
20
|
| Bolt of an asterisk of a camshaft |
45
|
| Bolt of a pulley of the water pump |
25
|
| The bolts, fixing the water pump to the block of cylinders: |
| – cтупень 1 |
20
|
| – cтупень 2 |
Tighten for 90 °
|
| Ventilating channel of a case of the engine |
20
|
| Bolts of a casing of a forward epiploon of a cranked shaft: |
| – M6 |
10
|
| – M8 |
25
|
| The bolts, fixing pulley and the shock-absorber of a cranked shaft to an asterisk |
25
|
| Bolts of a casing of a back epiploon of a cranked shaft: |
| – M6 |
10
|
| – M8 |
20
|
| Bolt of an asterisk of a cranked shaft: |
| – cтупень 1 |
90
|
| – cтупень 2 |
Tighten for 90 °
|
| Bolts of a head of cylinders: |
| – cтупень 1 |
40
|
| – cтупень 2 |
60
|
| – cтупень 3 |
Tighten for 90 °
|
| – cтупень 4 |
Tighten for 90 °
|
| Bolts of an intermediate plate of the engine |
10
|
| The bolts, fixing ears for engine lifting to a head of cylinders |
20
|
| Bolts of the top cover of the engine |
5
|
| The bolts, fixing an exhaust pipe to a turbonagnetatel |
25
|
| Flywheel bolts: |
| – cтупень 1 |
60
|
| – cтупень 2 |
Tighten for 90 °
|
| The bolts, fixing a plate of the sensor of the Hall to an inlet collector |
25
|
| Bolts, krpyashchy the Hall sensor to a head of cylinders |
10
|
| Flange of an intermediate shaft |
25
|
| Asterisk of an intermediate shaft |
45
|
| Bolts of covers of radical bearings: |
| – cтупень 1 |
65
|
| – cтупень 2 |
Tighten for 90 °
|
| Bolts of an oil radiator |
25
|
| Oil filter |
25
|
| Bolts of a cover of the oil pump |
10
|
| Bolt of the oil pump |
25
|
| Bolts of a pulley of the pump of the power steering |
25
|
| The bolts, speeds fixing the sensor to a cranked shaft: |
| – cтупень 1 |
10
|
| – cтупень 2 |
Tighten for 90 °
|
| Bolts of a maslozaborny branch pipe |
10
|
| Bolts of the oil pallet |
20
|
| Bolts of an internal cover of a gas-distributing belt |
10
|
| Bolts of the bottom external cover of a gas-distributing belt |
10
|
| Nut of a natyazhitel |
20
|
| The bolts, fixing the top cover to the engine |
5
|
| The bolts, fixing the hydrotransformer to a leading disk |
35
|
| The bolts, fixing cover and transmission arm to the block of cylinders |
45
|
| Bolts of the vacuum pump |
20
|
