Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 3.2. Diesel engines
- 3.2.1.2. Technical characteristics
3.2.1.3. Sinkhronizatsionnye of a gazoraspredeleniye label
3.2.1.4. Compression check
3.2.1.5. Gas-distributing belt
3.2.1.6. Natyazhitel of a gas-distributing belt, asterisk
3.2.1.7. Additional driving belts
3.2.1.8. Camshaft cover
3.2.1.9. Camshaft epiploon
3.2.1.10. Epiploon of an intermediate shaft
3.2.1.11. Epiploons of a cranked shaft
3.2.1.12. Head of cylinders
3.2.1.13. Hydraulic pushers
3.2.1.14. Flywheel
3.2.1.15. Engine fastenings
3.2.1.16. Oil pallet
3.2.1.17. Oil pump and maslozaborny branch pipe
+ 3.2.2. 5-cylinder engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice
|
Removal
| PERFORMANCE ORDER |
1. In models with a mechanical transmission remove a transmission and coupling.
In models with an automatic box remove a transmission. |
| 2. Unscrew flywheel bolts, previously having stopped it. |
| 3. Remove a flywheel. |
|
Check
| PERFORMANCE ORDER |
| Check a flywheel on existence of wear and damages. At detection of those, address to the expert. |
|
Installation
Installation is carried out upside-down removals. The distance between a back surface of the block of cylinders and the surface of a leading disk which is joining to the hydrotransformer should be 27 mm of ± 1 mm. |
|
