Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 3.2. Diesel engines
   - 3.2.1.2. Technical characteristics
      3.2.1.3. Sinkhronizatsionnye of a gazoraspredeleniye label
      3.2.1.4. Compression check
      3.2.1.5. Gas-distributing belt
      3.2.1.6. Natyazhitel of a gas-distributing belt, asterisk
      3.2.1.7. Additional driving belts
      3.2.1.8. Camshaft cover
      3.2.1.9. Camshaft epiploon
      3.2.1.10. Epiploon of an intermediate shaft
      3.2.1.11. Epiploons of a cranked shaft
      3.2.1.12. Head of cylinders
      3.2.1.13. Hydraulic pushers
      3.2.1.14. Flywheel
      3.2.1.15. Engine fastenings
      3.2.1.16. Oil pallet
      3.2.1.17. Oil pump and maslozaborny branch pipe
   + 3.2.2. 5-cylinder engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c
Это интересно - читаем про интересные факты

3.2.1.16. Oil pallet

Removal

PERFORMANCE ORDER
1. Lift and fix a forward part of the car.
2. Remove the bottom guard of the engine.
3. Merge engine oil and get oil щуп.
4. Fix the engine on the lift.
5. Remove a forward cover of a transmission.
6. Braid the bottom nuts of a support of the engine.
7. Establish a jack under a cross-piece of a forward suspension bracket, unscrew bolts and slightly lower a cross-piece.
8. Unscrew pallet bolts.
9. Remove the pallet.

Installation

Installation is carried out upside-down removals.

PERFORMANCE ORDER
Clean surfaces of the pallet and the block of cylinders and establish new laying.