Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 3.2. Diesel engines
   - 3.2.1.2. Technical characteristics
      3.2.1.3. Sinkhronizatsionnye of a gazoraspredeleniye label
      3.2.1.4. Compression check
      3.2.1.5. Gas-distributing belt
      3.2.1.6. Natyazhitel of a gas-distributing belt, asterisk
      3.2.1.7. Additional driving belts
      3.2.1.8. Camshaft cover
      3.2.1.9. Camshaft epiploon
      3.2.1.10. Epiploon of an intermediate shaft
      3.2.1.11. Epiploons of a cranked shaft
      3.2.1.12. Head of cylinders
      3.2.1.13. Hydraulic pushers
      3.2.1.14. Flywheel
      3.2.1.15. Engine fastenings
      3.2.1.16. Oil pallet
      3.2.1.17. Oil pump and maslozaborny branch pipe
   + 3.2.2. 5-cylinder engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c

3.2.1.17. Oil pump and maslozaborny branch pipe

GENERAL INFORMATION

Oil pump

1. Cap of a drain opening of the pallet
2. Washer
3. Pallet bolts
4. Pallet laying
5. Bolts of a maslozaborny branch pipe
6. Maslozaborny branch pipe
7. Sealing ring
8. Screw of an oil jet
9. Oil jet
10. Gear wheels of the oil pump
11. Cover
12. Cover bolt
13. Pump bolts
14. Pallet
15. Basic arm of the engine and transmission
16. Arm bolts

Removal


PERFORMANCE ORDER
1. Remove the oil pallet.
2. Disconnect from the oil pump a maslozaborny branch pipe.
3. Unscrew bolts and remove the oil pump.
4. Uncover the pump.

Check

PERFORMANCE ORDER
1. Examine pump details on existence of wear and damages.
2. With the help щупа measure a gap between gear wheels of the pump and an axial gap of the pump.

Installation

Installation is carried out upside-down removals.