Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
- 3.1.1.2. Technical characteristics
3.1.1.3. Sinkhronizatsionnye of a gazoraspredeleniye label
3.1.1.4. Compression check
3.1.1.5. Gas-distributing belt
3.1.1.6. Natyazhitel of a gas-distributing belt, asterisk
3.1.1.7. Additional driving belts
3.1.1.8. Camshaft cover
3.1.1.9. Camshaft epiploon
3.1.1.10. Epiploon of an intermediate shaft
3.1.1.11. Epiploons of a cranked shaft
3.1.1.12. Head of cylinders
3.1.1.13. Hydraulic pushers
3.1.1.14. Flywheel
3.1.1.15. Engine fastenings
3.1.1.16. Oil pallet
3.1.1.17. Oil pump and maslozaborny branch pipe
+ 3.1.2. 5-cylinder engines
+ 3.1.3. 6-cylinder engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice
|
Removal
| PERFORMANCE ORDER |
| 1. Remove the oil pallet. |
|
2. Remove a maslozaborny branch pipe. |
|
3. Remove a sealing ring. |
|
4. Unscrew bolts of the oil pump. |
|
5. Remove the oil pump. |
| 6. Uncover the pump. |
|
Check
| PERFORMANCE ORDER |
| 1. Examine pump details on existence of wear and damages. |
|
2. With the help щупа measure a gap between gear wheels. |
|
3. With the help щупа measure an axial gap of the pump between the plane of gear wheels and the casing plane. |
|
Installation
| PERFORMANCE ORDER |
|
Installation is carried out upside-down removals. Tighten bolts of a cover of the pump. |
|
|
|
