Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   - 3.1.1.2. Technical characteristics
      3.1.1.3. Sinkhronizatsionnye of a gazoraspredeleniye label
      3.1.1.4. Compression check
      3.1.1.5. Gas-distributing belt
      3.1.1.6. Natyazhitel of a gas-distributing belt, asterisk
      3.1.1.7. Additional driving belts
      3.1.1.8. Camshaft cover
      3.1.1.9. Camshaft epiploon
      3.1.1.10. Epiploon of an intermediate shaft
      3.1.1.11. Epiploons of a cranked shaft
      3.1.1.12. Head of cylinders
      3.1.1.13. Hydraulic pushers
      3.1.1.14. Flywheel
      3.1.1.15. Engine fastenings
      3.1.1.16. Oil pallet
      3.1.1.17. Oil pump and maslozaborny branch pipe
   + 3.1.2. 5-cylinder engines
   + 3.1.3. 6-cylinder engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice

Volkswagen Phaeton - �� Volkswagen Phaeton

3.1.1.13. Hydraulic pushers

GENERAL INFORMATION

Pushers are regulated automatically, and do not demand maintenance.

For check of functioning of pushers, warm up the engine, muffle it and uncover a camshaft.

Turn a cranked shaft so that the first cam of a camshaft of the N1 cylinder was directed up.

Press a pusher and measure its course. If the pusher course before the valve will start to open, is more than 0,2 mm or less than 0,1 mm, it is necessary to replace a pusher.