Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   - Technical characteristics Sinkhronizatsionnye of a gazoraspredeleniye label Compression check Gas-distributing belt Natyazhitel of a gas-distributing belt, asterisk Additional driving belts Camshaft cover Camshaft epiploon Epiploon of an intermediate shaft Epiploons of a cranked shaft Head of cylinders Hydraulic pushers Flywheel Engine fastenings Oil pallet Oil pump and maslozaborny branch pipe
   + 3.1.2. 5-cylinder engines
   + 3.1.3. 6-cylinder engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice

ff85f19c Oil pallet


Oil pallet (ADR)


1. Lift and fix a forward part of the car.
2. Remove the bottom guard of the engine.
3. Merge engine oil and get oil щуп.
4. Fix the engine on the lift.
5. Remove a forward cover of a transmission.
6. Braid the bottom nuts of a support of the engine.
7. Establish a jack under a cross-piece of a forward suspension bracket, unscrew bolts and slightly lower a cross-piece.
8. Unscrew pallet bolts.
9. Remove the pallet.


Clean surfaces of the pallet and the block of cylinders and establish new laying. Installation is carried out upside-down removals.