Audi 100/A6
1990-1997 of release
Repair and car operation
Audi 100/A6
+
1. Maintenance instruction
+
2. Maintenance
-
3. Engines
-
3.1.1.2. Technical characteristics
3.1.1.3. Sinkhronizatsionnye of a gazoraspredeleniye label
3.1.1.4. Compression check
3.1.1.5. Gas-distributing belt
3.1.1.6. Natyazhitel of a gas-distributing belt, asterisk
3.1.1.7. Additional driving belts
3.1.1.8. Camshaft cover
3.1.1.9. Camshaft epiploon
3.1.1.10. Epiploon of an intermediate shaft
3.1.1.11. Epiploons of a cranked shaft
3.1.1.12. Head of cylinders
3.1.1.13. Hydraulic pushers
3.1.1.14. Flywheel
3.1.1.15. Engine fastenings
3.1.1.16. Oil pallet
3.1.1.17. Oil pump and maslozaborny branch pipe
+
3.1.2. 5-cylinder engines
+
3.1.3. 6-cylinder engines
+
3.2. Diesel engines
+
3.3. Removal and partition of engines
+
4. Cooling system
+
5. Heating and ventilation
+
6. Fuel system
+
7. Exhaust system
+
8. Systems of start, ignition
+
9. Transmission
+
10. Brake system
+
11. Suspension brackets, steering
+
12. Body
+
13. Electric equipment
+
14. Good advice
3.1.1.15. Engine fastenings
Check
PERFORMANCE ORDER
1.
Lift and fix a forward part of the car.
2.
Examine rubber shock-absorbers of support on existence of wear and damages, if necessary replace them.
3.
Check, that bolts of support were strong tightened.
4.
Check, whether support are worn-out.
Replacement
FORWARD SUPPORT
PERFORMANCE ORDER
1.
Unscrew bolts and remove a support and the rubber shock-absorber.
2.
Establish a new support and the shock-absorber.
RIGHT AND LEFT SUPPORT
PERFORMANCE ORDER
1.
Fix the engine on the lift.
2.
Braid nuts and remove support.
3.
Establish new support.
