Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
- 9. Transmission
   - 9.1.2. Technical characteristics
      9.1.3. Pumping of hydraulic system of a drive of switching off of coupling
      9.1.4. Coupling adjustment
      9.1.5. Coupling pedal
      9.1.6. Main cylinder of a drive of switching off of coupling
      9.1.7. Working cylinder of a drive of switching off of coupling
      9.1.8. Disk of coupling and casing
      9.1.9. Vyzhimna bearing and lever
      9.1.10. Malfunctions of coupling
   + 9.2. Mekhnichesky transmission
   + 9.3. Automatic transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c

9.1.9. Vyzhimna bearing and lever

GENERAL INFORMATION

Elements of the mechanism of switching off of coupling (transmission 01Е)
1. Transmission
2. intermediate fastening
3. Epiploon
4. The directing plug
5. Bolt
6. Lever of switching off of coupling
7. Spring
8. Bolt
9. Vyzhimna bearing

Removal

PERFORMANCE ORDER
1. Remove a transmission.
2. Remove the lever of switching off of coupling from a spherical support. On a transmission 012 wring out a spring clip and remove the lever from a support.
3. Remove the bearing from the lever (a transmission 012).
4. On models with a transmission 01Е turn off a fixing bolt and remove an elastic plate. Remove the bearing and the lever.

Survey

Check ease of rotation of the bearing. Replace the bearing if it is worn-out.

Installation

PERFORMANCE ORDER
1. Grease a spherical support and the hinge of the lever of switching off of coupling with copper greasing. Grease vyzhimny the bearing.
2. On a transmission 012 establish a spring on the lever of switching off of coupling and insert a spring into an opening.
3. Establish the lever and the bearing into place. Tighten a fixing bolt. Establish the lever on a spherical support so that the spring clip fixed the lever.
4. On models with a transmission 01Е establish intermediate fastening on the lever, then establish the lever and the bearing into place. Tighten a fixing bolt.