Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
- 9. Transmission
   - 9.1.2. Technical characteristics
      9.1.3. Pumping of hydraulic system of a drive of switching off of coupling
      9.1.4. Coupling adjustment
      9.1.5. Coupling pedal
      9.1.6. Main cylinder of a drive of switching off of coupling
      9.1.7. Working cylinder of a drive of switching off of coupling
      9.1.8. Disk of coupling and casing
      9.1.9. Vyzhimna bearing and lever
      9.1.10. Malfunctions of coupling
   + 9.2. Mekhnichesky transmission
   + 9.3. Automatic transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c

9.1.7. Working cylinder of a drive of switching off of coupling

Removal

PERFORMANCE ORDER
1. Press a hydraulic hose of the working cylinder.
2. Weaken a nut of connection of a hydraulic hose on the cylinder.
3. Turn off a fixing bolt and remove the cylinder, having disconnected a hose.

Repair

PERFORMANCE ORDER
1. Remove a cover and a pusher.
2. Remove a fixing clip and remove the piston and a spring.
3. Clear elements of the cylinder and examine them on wear existence. Replace the cylinder if it is necessary.
4. Omit new consolidation in hydraulic liquid and establish it on the piston.
5. Lower a spring and the piston in hydraulic liquid and insert them into the cylinder.
6. Establish a new fixing clip.
7. Establish into place a pusher and a cover.

Installation

Installation is carried out upside-down removals.