Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
- 9. Transmission
   - 9.1.2. Technical characteristics
      9.1.3. Pumping of hydraulic system of a drive of switching off of coupling
      9.1.4. Coupling adjustment
      9.1.5. Coupling pedal
      9.1.6. Main cylinder of a drive of switching off of coupling
      9.1.7. Working cylinder of a drive of switching off of coupling
      9.1.8. Disk of coupling and casing
      9.1.9. Vyzhimna bearing and lever
      9.1.10. Malfunctions of coupling
   + 9.2. Mekhnichesky transmission
   + 9.3. Automatic transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c


9.1.4. Coupling adjustment

PERFORMANCE ORDER
1. Check, that the coupling pedal approximately on 10 mm was higher than a brake pedal. If adjustment is necessary, remove the furnish panel under a steering column.
2. Weaken a lock-nut on a fork of a pusher of the main cylinder of a drive of switching off of coupling and tighten up a fork as it is necessary.
3. Check, that the pedal in a free condition did not concern an emphasis.