Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
- 9. Transmission
   + 9.1.2. Technical characteristics
   - 9.2. Mekhnichesky transmission
      + 9.2.2. Technical characteristics
      9.2.3. Gear shifting mechanism
      9.2.4. Removal and MKPP installation
      9.2.5. MKPP partition
      9.2.6. Multipurpose switch and switch of lamps of a backing
      9.2.7. Speedometer sensor
      9.2.8. Epiploons
      9.2.9. Evident repair of a transmission 012
   + 9.3. Automatic transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice







ff85f19c


9.2. Mekhnichesky transmission

9.2.1. Introduction

GENERAL INFORMATION

Mechanism of gear shifting 012

1. Handle
2. Plug
3. Frame
4. Cover
5. Bolt
6. Plug
7. Ring
8. Lock ring
9. Rasporny plug
10. Spring
11. Spherical emphasis
12. Spring
13. Plug
14. Gear shifting lever
15. Nut
16. Lamellar spring
17. Connector
18. Tube
19. Lock ring
20. Casing of a spherical emphasis
21. Fastening of the mechanism of gear shifting
22. Nut
23. A strengthening plate
24. Nut
25. Bolt
26. A back switching rod
27. Rubber cover
28. A switching rod and universal connection
29. Clip
30. Bolt
31. Bolt

Universal connection of a switching rod (012)


Gear shifting mechanism 01Е

1. Connecting lever
2. Rod
3. A switching rod
4. Emphasis
5. Gear shifting lever
6. Support of the lever of switching
7. The switching lever on a transmission

Gear shifting mechanism 01Е

1. Gear shifting lever
2. A back switching pusher
3. Rubber plug
4. Emphasis
5. Semicircular loose leaves
6. Spring
7. Intermediate plate
8. Switching lever
9. Rubber cover
10. A back switching rod
11. Nut
12. Rasporny sleeve
13. Directing
14. Spring
15. Rasporny plug
16. Lock clip
17. Bolt
18. Left and right shock-absorbers
19. Top emphasis
20. Nut
21. Bottom emphasis
22. Arm

The transmission is fixed in a back part of the engine and has five transfers of a forward course and one transfer of a backing, the mechanism of synchronization is established on all transfers forward and a backing.

In a transmission the 012th lever of gear shifting is connected to a transmission one switching draft, and in a transmission 01Е two switching drafts.