Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
- 9. Transmission
   - 9.1.2. Technical characteristics
      9.1.3. Pumping of hydraulic system of a drive of switching off of coupling
      9.1.4. Coupling adjustment
      9.1.5. Coupling pedal
      9.1.6. Main cylinder of a drive of switching off of coupling
      9.1.7. Working cylinder of a drive of switching off of coupling
      9.1.8. Disk of coupling and casing
      9.1.9. Vyzhimna bearing and lever
      9.1.10. Malfunctions of coupling
   + 9.2. Mekhnichesky transmission
   + 9.3. Automatic transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice

9.1.5. Coupling pedal

GENERAL INFORMATION

Elements of fastening of a pedal of coupling

1. Arm
2. Nut
3. Washer
4. Brake pedal
5. Spring
6. Washer
7. Tube
8. Coupling pedal
9. Plug
10. Ring
11. Lever
12. Main cylinder of a drive of switching off of coupling

13. Bolt
14. Fork
15. Pin
16. Lock ring
17. Bolt
18. Arm
19. Washer
20. Nut
21. Hose
22. Spring
23. Clip
24. Switch of fires of an emergency brake
25. System valve cruise control

MODELS WITH RIGHT-HAND MANAGEMENT

Removal

The pedal of coupling acts in film together with a fixing arm.

PERFORMANCE ORDER

1. Remove the furnish panel.

2. Disconnect a fork of a pusher of the main cylinder from a pedal of coupling and remove the cylinder from an arm.

3. Disconnect wires from switches on an arm.

4. Turn off fixing nuts and remove an arm together with pedals.

Installation

Installation is carried out upside-down removals.

MODELS WITH LEFT FOREIGN MANAGEMENT

Removal

PERFORMANCE ORDER

1. Remove the furnish panel.

2. Disconnect a pusher of the main cylinder from a coupling pedal.

3. Establish a fixing clip on a spring and remove it.

4. Remove a coupling pedal.

Installation

Installation is carried out upside-down removals.