Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
- 9. Transmission
   - 9.1.2. Technical characteristics
      9.1.3. Pumping of hydraulic system of a drive of switching off of coupling
      9.1.4. Coupling adjustment
      9.1.5. Coupling pedal
      9.1.6. Main cylinder of a drive of switching off of coupling
      9.1.7. Working cylinder of a drive of switching off of coupling
      9.1.8. Disk of coupling and casing
      9.1.9. Vyzhimna bearing and lever
      9.1.10. Malfunctions of coupling
   + 9.2. Mekhnichesky transmission
   + 9.3. Automatic transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice

9.1.8. Disk of coupling and casing

Removal

PERFORMANCE ORDER

	1. Remove a transmission for receiving access to coupling.
2. Mark the provision of installation of a casing of coupling on a flywheel.

3. Holding a flywheel, turn off fixing bolts of a casing of coupling in a diagonal order. Remove bolts.
	4. Remove a casing of coupling and a frictional disk from a flywheel.

Survey

Examine plates of a diafragmenny spring on existence of wear and scratches. If depth any scratches exceeds 0,3 mm, replace coupling.

Examine press and a frictional disk, and also a flywheel on existence of wear or damages and replace them if it is necessary.

Installation

PERFORMANCE ORDER

	1. Establish a frictional disk on a flywheel.
	2. Establish a coupling casing on a disk.
3. Acquire fixing bolts and establish a frictional disk precisely on the center of a casing of coupling and a flywheel.
	4. Gradually in a diagonal order tighten fixing bolts of a casing of coupling till the demanded moment of an inhaling.