Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   + 6.1.2. Technical characteristics
   - 6.2. Multipoint system of injection of fuel
      6.2.2. Technical characteristics
      6.2.3. Air filter
      6.2.4. Accelerator rope
      6.2.5. Elements of system of injection of Motronic/Jetronic fuel
      6.2.6. Elements of system of injection of Digifant fuel
      6.2.7. Fuel filter
      6.2.8. Fuel pump and fuel level sensor
      6.2.9. Fuel tank
      6.2.10. Pressure release from system of injection of fuel
      6.2.11. Inlet collector
      6.2.12. Check of system of injection of fuel
      6.2.13. Unleaded gasoline
   + 6.3. System of injection of MPI/MPFI (6-cylinder engines)
   + 6.4. Power supply system of diesel engines
   6.5. Device of service of heating
   6.6. Diagnostics of malfunctions of system of heating
   6.7. Conditioner: not only "pluses", but also "minuses"
   6.8. Rules of service of the conditioner
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice

6.2.4. Accelerator rope

GENERAL INFORMATION

Rope fastening to butterfly valve sector (ADR engine)

Removal

PERFORMANCE ORDER


1. Remove a fixing clip and disconnect a rope from a butterfly valve axis.
	2. Remove a rope braid from a fixing arm.
3. Remove the furnish panel under a steering column.
4. Disconnect a rope from a pedal of an accelerator and remove a rope.

Installation

Installation is carried out upside-down removals.

Adjustment

MODELS WITH THE MECHANICAL TRANSMISSION

PERFORMANCE ORDER

Adjust the provision of a metal clip (it is specified by an arrow) on a rope braid that at completely squeezed out pedal of an accelerator the butterfly valve was completely open.