Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   + 6.1.2. Technical characteristics
   - 6.2. Multipoint system of injection of fuel
      6.2.2. Technical characteristics
      6.2.3. Air filter
      6.2.4. Accelerator rope
      6.2.5. Elements of system of injection of Motronic/Jetronic fuel
      6.2.6. Elements of system of injection of Digifant fuel
      6.2.7. Fuel filter
      6.2.8. Fuel pump and fuel level sensor
      6.2.9. Fuel tank
      6.2.10. Pressure release from system of injection of fuel
      6.2.11. Inlet collector
      6.2.12. Check of system of injection of fuel
      6.2.13. Unleaded gasoline
   + 6.3. System of injection of MPI/MPFI (6-cylinder engines)
   + 6.4. Power supply system of diesel engines
   6.5. Device of service of heating
   6.6. Diagnostics of malfunctions of system of heating
   6.7. Conditioner: not only "pluses", but also "minuses"
   6.8. Rules of service of the conditioner
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c


6.2.10. Pressure release from system of injection of fuel

PERFORMANCE ORDER
1. Remove the relay or a safety lock of the fuel pump and scroll a cranked shaft of the engine a starter within several seconds for pressure release.
2. Accurately disconnect any of tubes of a power supply system and finally let out pressure.