Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 3.2. Diesel engines
+ 3.2.1.2. Technical characteristics
- 3.2.2. 5-cylinder engines
3.2.2.2. Technical characteristics
3.2.2.3. Sinkhronizatsionnye of a gazoraspredeleniye label
3.2.2.4. Compression check
3.2.2.5. Gas-distributing belt
3.2.2.6. Driving belt of the fuel pump
3.2.2.7. Natyazhitel of a gas-distributing belt and asterisk
3.2.2.8. Additional driving belt
3.2.2.9. Camshaft cover
3.2.2.10. Camshaft epiploons
3.2.2.11. Epiploons of a cranked shaft
3.2.2.12. Head of cylinders
3.2.2.13. Hydraulic pushers
3.2.2.14. Flywheel
3.2.2.15. Engine fastenings
3.2.2.16. Oil pallet
3.2.2.17. Oil pump and maslozaborny branch pipe
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice
|
Removal
| PERFORMANCE ORDER |
| 1. Remove a back cover of the engine. |
| 2. Unscrew candles. |
| 3. Establish the N1 piston in VMT. |
|
ABP, AAT, AEL
| PERFORMANCE ORDER |
|
1. Weaken a nut of a natyazhitel. |
|
2. Remove a belt. |
|
AAS
| PERFORMANCE ORDER |
| Stop a pump asterisk, unscrew a bolt of an asterisk and remove a belt. |
|
Check Examine a belt on existence of pollution by greasing or oil, and also on existence of wear or damages. If necessary replace a belt. Installation Installation is made in sequence, return to removal. ABP, AAT, AEL
| PERFORMANCE ORDER |
|
Make the lever of a natyazhitel effort approximately in 2,5 kg, turn a cranked shaft on a turn floor clockwise and tighten a nut of a natyazhitel. |
|
AAS Belt will pull correctly if it can be overwound no more than on 90 °. |
|
