Audi 100/A6
1990-1997 of release
Repair and car operation
Audi 100/A6
+
1. Maintenance instruction
+
2. Maintenance
+
3. Engines
-
3.2. Diesel engines
+
3.2.1.2. Technical characteristics
-
3.2.2. 5-cylinder engines
3.2.2.2. Technical characteristics
3.2.2.3. Sinkhronizatsionnye of a gazoraspredeleniye label
3.2.2.4. Compression check
3.2.2.5. Gas-distributing belt
3.2.2.6. Driving belt of the fuel pump
3.2.2.7. Natyazhitel of a gas-distributing belt and asterisk
3.2.2.8. Additional driving belt
3.2.2.9. Camshaft cover
3.2.2.10. Camshaft epiploons
3.2.2.11. Epiploons of a cranked shaft
3.2.2.12. Head of cylinders
3.2.2.13. Hydraulic pushers
3.2.2.14. Flywheel
3.2.2.15. Engine fastenings
3.2.2.16. Oil pallet
3.2.2.17. Oil pump and maslozaborny branch pipe
+
3.3. Removal and partition of engines
+
4. Cooling system
+
5. Heating and ventilation
+
6. Fuel system
+
7. Exhaust system
+
8. Systems of start, ignition
+
9. Transmission
+
10. Brake system
+
11. Suspension brackets, steering
+
12. Body
+
13. Electric equipment
+
14. Good advice
3.2.2.10. Camshaft epiploons
Replacement
FORWARD EPIPLOON
PERFORMANCE ORDER
1.
Remove an asterisk of a camshaft and take an old epiploon.
2.
Put on a new epiploon a shaft.
3.
Hammer an epiploon into place.
BACK EPIPLOON
PERFORMANCE ORDER
1.
Remove a driving belt of the fuel pump and a back asterisk of a camshaft.
2.
Take an old epiploon and establish the new.
