Audi 100/A6 + 1. Maintenance instruction + 2. Maintenance - 3. Engines + 3.1.1.2. Technical characteristics - 3.1.2. 5-cylinder engines 3.1.2.2. Technical characteristics 3.1.2.3. Sinkhronizatsionnye of a gazoraspredeleniye label 3.1.2.4. Compression check 3.1.2.5. Gas-distributing belt 3.1.2.6. Natyazhitel of a gas-distributing belt, asterisk 3.1.2.7. Additional driving belt 3.1.2.8. Camshaft cover 3.1.2.9. Camshaft epiploon 3.1.2.10. Epiploons of a cranked shaft 3.1.2.11. Head of cylinders 3.1.2.12. Hydraulic pushers 3.1.2.13. Flywheel 3.1.2.14. Engine fastenings 3.1.2.15. Oil pallet 3.1.2.16. Oil pump and maslozaborny branch pipe + 3.1.3. 6-cylinder engines + 3.2. Diesel engines + 3.3. Removal and partition of engines + 4. Cooling system + 5. Heating and ventilation + 6. Fuel system + 7. Exhaust system + 8. Systems of start, ignition + 9. Transmission + 10. Brake system + 11. Suspension brackets, steering + 12. Body + 13. Electric equipment + 14. Good advice
|
Removal
PERFORMANCE ORDER |
1. Disconnect a wire of the minus plug of the accumulator. |
|
NATYAZHITEL
PERFORMANCE ORDER |
2. Remove a gas-distributing belt. |
3. Unscrew bolts and remove a natyazhitel. |
|
CAMSHAFT ASTERISK
PERFORMANCE ORDER |
4. Remove a gas-distributing belt. |
5. Unscrew a bolt of an asterisk of a camshaft and remove an asterisk. |
|
ASTERISK OF THE CRANKED SHAFT
PERFORMANCE ORDER |
6. Remove a gas-distributing belt. |
7. Unscrew a bolt of an asterisk of a cranked shaft and remove an asterisk. |
|
Check
PERFORMANCE ORDER |
1. Clean asterisks and examine them on existence of wear and damages. |
2. Examine a natyazhitel on existence of wear and damages, if necessary replace it. |
|
Installation
Installation of all details is carried out upside-down removals.
|
|