Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
+ 3.1.1.2. Technical characteristics
- 3.1.2. 5-cylinder engines
3.1.2.2. Technical characteristics
3.1.2.3. Sinkhronizatsionnye of a gazoraspredeleniye label
3.1.2.4. Compression check
3.1.2.5. Gas-distributing belt
3.1.2.6. Natyazhitel of a gas-distributing belt, asterisk
3.1.2.7. Additional driving belt
3.1.2.8. Camshaft cover
3.1.2.9. Camshaft epiploon
3.1.2.10. Epiploons of a cranked shaft
3.1.2.11. Head of cylinders
3.1.2.12. Hydraulic pushers
3.1.2.13. Flywheel
3.1.2.14. Engine fastenings
3.1.2.15. Oil pallet
3.1.2.16. Oil pump and maslozaborny branch pipe
+ 3.1.3. 6-cylinder engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice
|
FORWARD EPIPLOON OF THE CRANKED SHAFT
| PERFORMANCE ORDER |
| 1. Remove a gas-distributing belt and an asterisk of a cranked shaft. |
| 2. Drill in an epiploon two holes, screw in in them screws and take an epiploon. |
| 3. Oil a new epiploon and hammer it on the place. |
|
BACK EPIPLOON OF THE CRANKED SHAFT
| PERFORMANCE ORDER |
| 1. Remove a flywheel. |
| 2. Drill in an epiploon two holes, screw in in them screws and take an epiploon, or remove a casing of an epiploon and beat out an epiploon from a casing. |
| 3. Oil a new epiploon and hammer it on the place. |
|
|
|
