Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + Technical characteristics
   - 3.1.2. 5-cylinder engines Technical characteristics Sinkhronizatsionnye of a gazoraspredeleniye label Compression check Gas-distributing belt Natyazhitel of a gas-distributing belt, asterisk Additional driving belt Camshaft cover Camshaft epiploon Epiploons of a cranked shaft Head of cylinders Hydraulic pushers Flywheel Engine fastenings Oil pallet Oil pump and maslozaborny branch pipe
   + 3.1.3. 6-cylinder engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice

ff85f19c Oil pump and maslozaborny branch pipe


1. Remove a gas-distributing belt and an asterisk of a cranked shaft.
2. Remove the oil pallet.
3. Remove an internal cover of a gas-distributing belt.
4. Remove a maslozaborny branch pipe.
5. Remove the oil pump and its laying.


1. Uncover the pump. In drawing – the oil pump without a cover.
2. Unscrew a cap of the reduktsionny valve and get a washer, a spring and the piston.
3. Examine all details of the pump and the valve on existence of wear and damages.
4. Collect the pump.


Installation is carried out upside-down removals.