Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1.1.2. Technical characteristics
   - 3.1.2. 5-cylinder engines
      3.1.2.2. Technical characteristics
      3.1.2.3. Sinkhronizatsionnye of a gazoraspredeleniye label
      3.1.2.4. Compression check
      3.1.2.5. Gas-distributing belt
      3.1.2.6. Natyazhitel of a gas-distributing belt, asterisk
      3.1.2.7. Additional driving belt
      3.1.2.8. Camshaft cover
      3.1.2.9. Camshaft epiploon
      3.1.2.10. Epiploons of a cranked shaft
      3.1.2.11. Head of cylinders
      3.1.2.12. Hydraulic pushers
      3.1.2.13. Flywheel
      3.1.2.14. Engine fastenings
      3.1.2.15. Oil pallet
      3.1.2.16. Oil pump and maslozaborny branch pipe
   + 3.1.3. 6-cylinder engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c



3.1.2.3. Sinkhronizatsionnye of a gazoraspredeleniye label

GENERAL INFORMATION

Label on a forward part of an asterisk of a camshaft


Labels on a pulley of a cranked shaft and a casing of the oil pump

Asterisks of a cranked shaft, camshaft and intermediate shaft have a drive from a gas-distributing belt and rotate inphase.

If phase synchronism of rotation of asterisks is broken, valves will concern pistons during rotation of a cranked shaft.

The highest point of which reaches the N1 piston at the moment of a compression step is accepted to the top dead point.

Combining sinkhronizatsionny labels, you establish the N1 piston in VMT and provide phase synchronism of rotation of asterisks.


The label on a back part of an asterisk of a camshaft is combined with a label on an internal cover of a gas-distributing belt.