Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   - 6.1.2. Technical characteristics
      6.1.3. Air filter and branch pipes of a fence of air
      6.1.4. A regulator of temperature of arriving air
      6.1.5. Accelerator rope
      6.1.6. Elements of system of injection of fuel
      6.1.7. Fuel filter
      6.1.8. Fuel pump and fuel level sensor
      6.1.9. Fuel tank
      6.1.10. Pressure release from system of injection of fuel
      6.1.11. Inlet collector
      6.1.12. Check of system of injection of fuel
      6.1.13. Unleaded gasoline
   + 6.2. Multipoint system of injection of fuel
   + 6.3. System of injection of MPI/MPFI (6-cylinder engines)
   + 6.4. Power supply system of diesel engines
   6.5. Device of service of heating
   6.6. Diagnostics of malfunctions of system of heating
   6.7. Conditioner: not only "pluses", but also "minuses"
   6.8. Rules of service of the conditioner
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice

6.1.3. Air filter and branch pipes of a fence of air

Removal

PERFORMANCE ORDER

1. Release clips and uncover the air filter. Remove the air filter.
	2. Release collars and disconnect air branch pipes and vacuum hoses from an airintaking branch pipe of the case of a butterfly valve. Turn off fixing bolts (are specified by shooters), release clips and remove a branch pipe.
3. Turn off fixing bolts and nuts and remove a casing of the air filter.

Installation

Installation is carried out upside-down removals.