Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   - 6.1.2. Technical characteristics
      6.1.3. Air filter and branch pipes of a fence of air
      6.1.4. A regulator of temperature of arriving air
      6.1.5. Accelerator rope
      6.1.6. Elements of system of injection of fuel
      6.1.7. Fuel filter
      6.1.8. Fuel pump and fuel level sensor
      6.1.9. Fuel tank
      6.1.10. Pressure release from system of injection of fuel
      6.1.11. Inlet collector
      6.1.12. Check of system of injection of fuel
      6.1.13. Unleaded gasoline
   + 6.2. Multipoint system of injection of fuel
   + 6.3. System of injection of MPI/MPFI (6-cylinder engines)
   + 6.4. Power supply system of diesel engines
   6.5. Device of service of heating
   6.6. Diagnostics of malfunctions of system of heating
   6.7. Conditioner: not only "pluses", but also "minuses"
   6.8. Rules of service of the conditioner
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c

6.1.11. Inlet collector

Removal

PERFORMANCE ORDER
1. Remove the case of a butterfly valve and an intermediate flange.

2. Disconnect water and vacuum hoses from an inlet collector
3. Turn off bolts and a nut and remove a fixing arm of a heating element of an inlet collector.
4. Remove a washer and disconnect the socket of connection of a heating element.
5. Turn off fixing bolts and remove them.
6. Remove an inlet collector.
7. Remove laying and a sealing ring.
8. Turn off fixing bolts and remove a heating element if it is necessary.

Installation

Installation is carried out upside-down removals.