Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   - 6.1.2. Technical characteristics
      6.1.3. Air filter and branch pipes of a fence of air
      6.1.4. A regulator of temperature of arriving air
      6.1.5. Accelerator rope
      6.1.6. Elements of system of injection of fuel
      6.1.7. Fuel filter
      6.1.8. Fuel pump and fuel level sensor
      6.1.9. Fuel tank
      6.1.10. Pressure release from system of injection of fuel
      6.1.11. Inlet collector
      6.1.12. Check of system of injection of fuel
      6.1.13. Unleaded gasoline
   + 6.2. Multipoint system of injection of fuel
   + 6.3. System of injection of MPI/MPFI (6-cylinder engines)
   + 6.4. Power supply system of diesel engines
   6.5. Device of service of heating
   6.6. Diagnostics of malfunctions of system of heating
   6.7. Conditioner: not only "pluses", but also "minuses"
   6.8. Rules of service of the conditioner
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c

6.1.4. A regulator of temperature of arriving air

Removal

PERFORMANCE ORDER
1. Disconnect vacuum hoses from a regulator.
2. Remove an air branch pipe from the butterfly valve case.
3. Remove a fixing plate (it is specified by an arrow) and remove a regulator.

Installation

Installation is carried out upside-down removals.