Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1.1.2. Technical characteristics
   + 3.1.2. 5-cylinder engines
   - 3.1.3. 6-cylinder engines
      3.1.3.2. Gear belt
      3.1.3.3. Head of cylinders
      3.1.3.4. Valves
      3.1.3.5. Replacement of maslosjemny caps of valves
      3.1.3.6. Check of directing valves
      3.1.3.7. Fair processing of a landing facet of the saddle / valve
      3.1.3.8. Grinding in of saddles of valves
      3.1.3.9. Compression check
      3.1.3.10. Poliklinova belt
      3.1.3.11. Greasing system
      3.1.3.12. Oil pump
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice

3.1.3.11. Greasing system

GENERAL INFORMATION

System of greasing of the 6-cylinder engine

1. Bolt, 10 Nanometers
2. Bolt, 10 Nanometers
3. Oil pallet, top part
4. Oil pallet, lower part

5. Bolt, 10 Nanometers
6. Nut, 30 Nanometers
7. Bolt, 10 Nanometers
8. Stopper of a drain opening, 40 Nanometers

Prevention

With input of the A6 model (6/94) the cover of the oil pump and sealing laying under the lower part of the oil pallet are changed maslosjemnik/. Pay attention upon purchase of spare parts.