Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
- 8. Systems of start, ignition
   + 8.1.1. Introduction
   - 8.2. Ignition system (petrol engines)
      + 8.2.1.1. Principle of work of PMS
      8.2.2. Technical characteristics
      8.2.3. Check of system of ignition
      8.2.4. Ignition coil
      8.2.5. Ignition distributor
      8.2.6. Corner of an advancing of ignition
      8.2.7. Sensors of system of ignition
      8.2.8. Begunok of the ignition distributor
      8.2.9. Ignition system (6-cylinder engines 2,6 and 2,8 of l)
      8.2.10. Diagnostics of malfunctions of system of injection of gasoline
      8.2.11. That it is necessary to know to the owner of the car with the injector engine
      8.2.12. Turbo doctor
   + 8.3. System of prestarting heating (diesel engines)
   + 8.4. System of production of exhaust gases
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c

8.2.6. Corner of an advancing of ignition

Adjustment

ADR ENGINE

The corner of an advancing of ignition is supervised by the electronic control unit and is not subject to adjustment.

AAE, ABK, AAD AND AAR ENGINES

PERFORMANCE ORDER
1. Warm up the engine.
2. Connect a stroboscope.
3. Switch off all elements of electric equipment and start the engine.
4. Check, that the corresponding mark in a flywheel was on one line with bottom edge of an adjusting window.
5. For carrying out adjustment, turn the ignition distributor as it is necessary.