1. Warm up the engine. |
|
2. Turn off a cap of a drain opening approximately on a turn floor. Establish the container for collecting oil and completely unscrew a cap. |
3. Wait, while oil will flow down, moving the container if it is necessary. |
4. Wipe a cap and replace a sealing washer if it is necessary. Wipe area round a drain opening and twirl a cap till the demanded moment of an inhaling. |
5. Establish the container for collecting oil under the oil filter. |
|
6. Using the tool for removal of the oil filter if it is necessary, weaken a filter inhaling. |
|
7. Unscrew the filter a hand |
8. Clear a filter installation site. Oil a sealing ring of the new filter and establish it on the engine. Reliably twirl the filter a hand. |
|
9. Turn off a cap of a jellied mouth. |
|
10. Get щуп for check of level of oil. |
|
11. Fill in oil of demanded type. |
12. Start the engine and check, whether there is no leakage of oil round the oil filter and a cap of a drain opening. |
Prevention
On models with a turbokompressor do not lift engine turns, the alarm bulb of pressure of oil will not go out yet!
|