1. Warm up the engine. |
2. Turn off a cap of a drain opening approximately on a turn floor. Establish the container for collecting oil and completely unscrew a cap. |
3. Wait, while oil will flow down, moving the container if it is necessary. |
4. Wipe a cap and replace a sealing washer if it is necessary. Wipe area round a drain opening and twirl a cap till the demanded moment of an inhaling. |
5. Establish the container for collecting oil under the oil filter. |
|
6. Using the tool for removal of the oil filter if it is necessary, weaken an inhaling of the filter and unscrew it a hand. |
7. Clear a filter installation site. Oil a sealing ring of the new filter and establish it on the engine. Reliably twirl the filter a hand. |
|
8. Turn off a cap of a jellied mouth and get щуп for check of level of oil. Fill in oil of demanded type. |
9. Start the engine and check, whether there is no leakage of oil round the oil filter and a cap of a drain opening.
Prevention
On models with a turbokompressor do not lift engine turns, the alarm bulb of pressure of oil will not go out yet!
|