Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
- 11. Suspension brackets, steering
   11.2. Technical characteristics
   11.3. General description of adjustment of wheels
   + 11.4. Forward suspension bracket
   + 11.5. Back suspension bracket
   - 11.6. Steering
      11.6.2. Steering column
      11.6.3. Lock ignition / lock of a steering column
      11.6.4. Steering mechanism
      11.6.5. Boots of the steering mechanism
      11.6.6. System of the hydraulic booster of a steering
      11.6.7. Pump of system of the hydraulic booster of a steering
      11.6.8. Spherical hinge of steering draft
      11.6.9. Steering draft
   + 11.7. Semi-axes
   11.8. Easily and easy
   11.9. Maintenance of system of a steering
   11.10. Diagnostics of malfunctions of system of a steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c

11.6.9. Steering draft

Removal

PERFORMANCE ORDER
1. Remove the corresponding forward wheel.
2. Turn off a fixing nut of the spherical hinge and disconnect the hinge from a suspension bracket rack by means of the tool for division of spherical hinges.
3. Turn off a fixing bolt of steering draft on the steering mechanism and remove draft from the car.

Installation

Installation is carried out upside-down removals.

PERFORMANCE ORDER
Do not mix the provision of installation of draft. Check, that drafts were established so that internal fastenings 1 and spherical hinges 2 were turned in the correct party.