Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
- 11. Suspension brackets, steering
   11.2. Technical characteristics
   11.3. General description of adjustment of wheels
   + 11.4. Forward suspension bracket
   + 11.5. Back suspension bracket
   - 11.6. Steering
      11.6.2. Steering column
      11.6.3. Lock ignition / lock of a steering column
      11.6.4. Steering mechanism
      11.6.5. Boots of the steering mechanism
      11.6.6. System of the hydraulic booster of a steering
      11.6.7. Pump of system of the hydraulic booster of a steering
      11.6.8. Spherical hinge of steering draft
      11.6.9. Steering draft
   + 11.7. Semi-axes
   11.8. Easily and easy
   11.9. Maintenance of system of a steering
   11.10. Diagnostics of malfunctions of system of a steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c canadian rx



11.6.3. Lock ignition / lock of a steering column

Removal

MECHANISM OF THE LOCK OF THE IGNITION / LOCK OF THE STEERING COLUMN

PERFORMANCE ORDER
1. Remove a steering wheel.
2. Remove a cover, turn off fixing nuts and remove wires of the combined switches.
3. Remove an instrument guard and the shelf.
4. Disconnect the connection socket (it is specified by an arrow) from the switch of the lock of ignition and remove wires from a steering column.
5. Turn off a fixing bolt of a casing of the lock.
6. Turn off fixing nuts, get bolts and get a column from a fixing arm. Remove the lock.
7. For replacement of a drum of the lock, drill an opening in a point shown in drawings (at the left – for the Audi 100 models, on the right – Audi A6) for receiving access to a lock latch. Insert a key into a lock crack, press on a latch and get a drum.

SWITCH OF THE LOCK OF IGNITION
PERFORMANCE ORDER
Turn off fixing screws and remove the switch from a lock casing.

Installation

Installation is carried out upside-down removals.