Repair and operation of the car of Audi 100/A6 - 11.6. Steering//Audi of 100/A6 1990-1997 / songbuddy.ru

Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
- 11. Suspension brackets, steering
   11.2. Technical characteristics
   11.3. General description of adjustment of wheels
   + 11.4. Forward suspension bracket
   + 11.5. Back suspension bracket
   - 11.6. Steering
      11.6.2. Steering column
      11.6.3. Lock ignition / lock of a steering column
      11.6.4. Steering mechanism
      11.6.5. Boots of the steering mechanism
      11.6.6. System of the hydraulic booster of a steering
      11.6.7. Pump of system of the hydraulic booster of a steering
      11.6.8. Spherical hinge of steering draft
      11.6.9. Steering draft
   + 11.7. Semi-axes
   11.8. Easily and easy
   11.9. Maintenance of system of a steering
   11.10. Diagnostics of malfunctions of system of a steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c



11.6. Steering

11.6.1. Steering wheel

MODELS WITHOUT THE SAFETY AIRBAG

Removal


PERFORMANCE ORDER
1. Establish forward wheels directly and close a steering column.
2. Remove the panel in the center of a steering wheel.
3. Turn off a fixing nut, mark the provision of installation of a steering wheel on a shaft of a steering column and remove a steering wheel.

Installation

Installation is carried out upside-down removals.

MODELS WITH THE SAFETY AIRBAG
Prevention

Observe precautionary measures at work with the module of an airbag of safety.


Removal

PERFORMANCE ORDER
1. Remove the module of an airbag of safety.
2. Establish forward wheels directly and close a steering column.
3. Turn off two fixing screws and remove the top casing of a steering column.
4. Disconnect the socket of connection of the contact module of an airbag of safety.
5. Turn off a fixing nut, mark the provision of installation of a steering wheel on a shaft of a steering column and remove a steering wheel.

Installation

Installation is carried out upside-down removals.