Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
- 11. Suspension brackets, steering
   11.2. Technical characteristics
   11.3. General description of adjustment of wheels
   + 11.4. Forward suspension bracket
   - 11.5. Back suspension bracket
      11.5.2. Bearings of a nave of a back wheel
      11.5.3. Pin of a back wheel
      11.5.4. Rack of a back suspension bracket
      11.5.5. Cross-section draft of a back suspension bracket
      11.5.6. Stabilizer of cross-section stability of a back suspension bracket
      11.5.7. Cross-piece of a back suspension bracket
      11.5.8. System of adjustment of height of a back suspension bracket
      11.5.9. Elements of system of adjustment of height of a back suspension bracket
   + 11.6. Steering
   + 11.7. Semi-axes
   11.8. Easily and easy
   11.9. Maintenance of system of a steering
   11.10. Diagnostics of malfunctions of system of a steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c

11.5.6. Stabilizer of cross-section stability of a back suspension bracket

Removal

PERFORMANCE ORDER
1. Establish a jack under a back axis.
2. Turn off fixing nuts, remove fixing bolts from the stabilizer of cross-section stability from the left and right side and remove the stabilizer from the car.

Installation

Installation is carried out upside-down removals.