Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
- 11. Suspension brackets, steering
   11.2. Technical characteristics
   11.3. General description of adjustment of wheels
   - 11.4. Forward suspension bracket
      11.4.2. Rack of a forward suspension bracket
      11.4.3. Shock-absorbers of a forward suspension bracket
      11.4.4. Bottom lever of a forward suspension bracket
      11.4.5. Stabilizer of cross-section stability of a forward suspension bracket
      11.4.6. Cross-piece of a forward suspension bracket
   + 11.5. Back suspension bracket
   + 11.6. Steering
   + 11.7. Semi-axes
   11.8. Easily and easy
   11.9. Maintenance of system of a steering
   11.10. Diagnostics of malfunctions of system of a steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice

11.4.5. Stabilizer of cross-section stability of a forward suspension bracket

Removal

PERFORMANCE ORDER

1. At removal of the stabilizer of cross-section stability the car should stand on the earth.
	2. Turn off fixing bolts and clean a tube with wires aside if it is necessary.
	3. Turn off fixing bolts and nuts of fastening of the stabilizer of cross-section stability to a body. Remove fastenings.

4. Turn off fixing nuts and remove washers and back plugs.
	5. Remove the stabilizer of cross-section stability from the car.

Installation

Installation is carried out upside-down removals.

PERFORMANCE ORDER

	1. Establish plugs of fastenings on rims of the stabilizer of cross-section stability.

2. Establish fixing clips on plugs and acquire fixing bolts and nuts.

3. Tighten nuts of fastening of the stabilizer of cross-section stability to the suspension bracket lever till the demanded moment of an inhaling of a stage 1 and tighten and on a demanded corner.
	4. Tighten nuts of fixing clips till the demanded moment of an inhaling.