Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
- 9. Transmission
   + 9.1.2. Technical characteristics
   - 9.2. Mekhnichesky transmission
      + 9.2.2. Technical characteristics
      9.2.3. Gear shifting mechanism
      9.2.4. Removal and MKPP installation
      9.2.5. MKPP partition
      9.2.6. Multipurpose switch and switch of lamps of a backing
      9.2.7. Speedometer sensor
      9.2.8. Epiploons
      9.2.9. Evident repair of a transmission 012
   + 9.3. Automatic transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice

9.2.7. Speedometer sensor

GENERAL INFORMATION

Sensor of a speedometer and socket of the multipurpose switch

1–speedometer sensor
2–socket of the multipurpose switch

The sensor is located on the left side of a transmission, over a leading flange.

Sensor of a speedometer and laying (012)

And – the speedometer sensor
In – laying

Sensor of a speedometer and sealing ring

And – a sealing ring
In – the speedometer sensor

Removal

PERFORMANCE ORDER

1. Lift and fix a forward part of the car.

2. Disconnect a wire and remove the sensor.

Installation

Installation is made in sequence, return to removal.