Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
- 7. Exhaust system
   7.2. Technical characteristics
   7.3. Collecting system паров fuels
   + 7.4. System of collecting karterny gases
   + 7.5. System of a retsirkulyatsiya of exhaust gases
   7.6. Final collector
   7.7. urbokompressor
   7.8. Intermediate cooler
   7.9. System of production of the fulfilled gases
   7.10. Catalytic converter
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c

7.6. Final collector

PETROL ENGINES

Removal

PERFORMANCE ORDER
1. Remove a protective guard from below an impellent compartment.
2. Turn off fixing nuts and disconnect a reception pipe of an exhaust system.
3. Remove the oxygen sensor and a measuring tube if it is necessary.
4. Gradually turn off fixing nuts and remove a final collector.

Installation

Installation is carried out upside-down removals.

DIESEL ENGINES

Removal

PERFORMANCE ORDER
1. Remove a protective guard from below an impellent compartment.
2. Turn off fixing nuts and disconnect a reception pipe of an exhaust system.
3. Disconnect hoses and tubes from a turbokompressor.
4. Turn off fixing nuts and remove washers.
5. Remove a final collector together with a turbokompressor and laying (AAT engine).

Installation

Installation is carried out upside-down removals.