Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
- 7. Exhaust system
   7.2. Technical characteristics
   7.3. Collecting system паров fuels
   + 7.4. System of collecting karterny gases
   - 7.5. System of a retsirkulyatsiya of exhaust gases
      7.5.1. Device self-diagnostics
      7.5.2. Filament lamp and anchor
      7.5.3. Glow plugs
      7.5.4. The temperature sensor of cooling liquid
      7.5.5. A temperature-sensitive element of soaked-up air
   7.6. Final collector
   7.7. urbokompressor
   7.8. Intermediate cooler
   7.9. System of production of the fulfilled gases
   7.10. Catalytic converter
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice







ff85f19c


7.5. System of a retsirkulyatsiya of exhaust gases

GENERAL INFORMATION

This system consists of the valve of a retsirkulyatsiya, the modulyatorny valve and connecting hoses.

Valve of a retsirkulyatsiya and fixing bolts (engine 1Z)

Fixing nuts of the valve retsirkulyatsiya (engine 1Z)


Replacement of elements

RETSIRKULYATSIYA'S VALVE

PERFORMANCE ORDER
1. Disconnect a vacuum hose from the valve (on fig. at the left – the AAT engine, on the right – 1Z).
2. Turn off fixing bolts and remove laying.
3. Turn off fixing nuts and remove the valve.
4. Installation is carried out upside-down removals.