Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
- 4. Cooling system
   4.2. Technical characteristics
   4.3. Hoses of system of cooling
   4.4. Radiator
   4.5. Thermostat
   4.6. Cooling fan
   + 4.7. Switches and sensors of system of cooling
   4.8. Water pump
   4.9. The heat exchanger масло-/cooling liquid
   4.10. Diagnostics of malfunctions in a contour of circulation of oil
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c

4.8. Water pump

Removal

4-CYLINDER ENGINES


PERFORMANCE ORDER
1. Merge cooling liquid.
2. Remove driving belts.
3. Remove the generator.
4. Remove the pump of the hydraulic booster of a steering.
5. Turn off fixing bolts and remove a pump pulley.
6. Remove fixing arms of the generator and the pump of the hydraulic booster
steering.
7. Disconnect water hoses from the pump.
8. Turn off fixing bolts.
9. Remove the pump.
10. Remove a sealing ring.
11. Turn off fixing bolts and remove the pump and laying.

5-CYLINDER ENGINES

PERFORMANCE ORDER
1. Merge cooling liquid.
2. Remove a back cover of a gas-distributing belt.
3. Remove the pump of the hydraulic booster of a steering and fixing
arm.
4. Turn off fixing bolts and remove the pump.

Installation

PERFORMANCE ORDER
Installation is carried out upside-down removals. Establish a new sealing ring of the pump.